Parts and Keys

Key Rebound on a Typewriter: What It Is and How to Fix It

Key rebound on a typewriter can mean a typing technique or a mechanical problem such as double strikes. Learn what it means, common causes, and cautious fixes.

On this page
  1. What “rebound” means
  2. Rebound as a typing technique
  3. Rebound in the mechanism
  4. Common causes
  5. What to try first
  6. When to see a repairer
  7. Related reading

What “rebound” means

The word rebound is used in two different ways around typewriters, so it helps to know which one you mean:

  1. A typing technique. In typing instruction, a stroke should be quick and the finger should come off the key immediately so the key and typebar can spring back. Typists often describe this as a rebounding stroke.
  2. A mechanical effect. When a typebar hits the paper, it should bounce away from the platen and return to its resting position. If it does not return cleanly, or bounces back toward the platen, you can get double impressions, smudges, or a typebar that jams against the next one.

Rebound as a typing technique

On a manual machine the typebar needs to hit the platen and move away again. If you keep pressing the key after the strike, the type slug may rest against the ribbon and platen and smear the character. Good technique is to strike firmly and release at once. This gives the typebar room to return and also makes your typing more even.

Rebound in the mechanism

When you press a key, the typebar travels to the platen. The platen and the ribbon cushion the impact. Then a spring and gravity help return it. If something interferes with that return, you may see:

  • characters printed twice, slightly offset
  • keys that stay up or return slowly
  • two typebars colliding in the basket
  • uneven impressions

Common causes

  • Dirt or old oil. Dust, old oil and dried grease can slow the typebar pivots and key linkages.
  • Weak or displaced springs. Machines are old, and some parts may have lost tension or come out of position.
  • A hard platen. Hardened rubber does not absorb the impact as well, so the typebar may bounce more and sound louder. See What Is the Platen on a Typewriter, and Why Does It Matter?.
  • Heavy touch. Hitting too hard or holding the key down can add to the problem.
  • Bent typebars or damaged parts. These are less common, but they can cause misalignment and sticking.

What to try first

  1. Check your technique. Use a firm, quick stroke and release immediately.
  2. Check the ribbon. A worn or incorrectly seated ribbon can make impressions look doubled or faint. See How a Typewriter Ribbon Works.
  3. Clean the type slugs and visible parts. Gently brush out dust and debris from the typebars and basket.
  4. Inspect the platen. Look for glossy, hard, or cracked rubber.
  5. Look for visible damage. Typebars should line up with the printing point and not rub on neighbours.

Avoid heavy oiling. Too much lubricant tends to collect dust and can make sticking worse. If you are unsure which parts of a machine should or should not be lubricated, ask an experienced repairer or consult the manual for your model.

When to see a repairer

If cleaning and technique do not fix it, or if you see bent parts, broken springs, or a typebar that will not return, a typewriter repairer can diagnose it safely. If you are still shopping, testing for these faults is part of what to check before buying a used typewriter. Forcing bent parts can make the damage worse.

The complete guide to parts and keys

Parts of a Typewriter: A Complete Anatomy Guide
Read the guide

Keep exploring

Guides from other topics

All topics →