What the tab key is for
The tab key moves the carriage quickly to a preset position on the line. Before tabs, a typist who wanted to type a table, or indent the first line of a paragraph, had to press the space bar or backspace key many times. The tab mechanism was added to make that fast and consistent. The word “tab” itself comes from “tabulate”, meaning to arrange data in columns.
Typical uses:
- Indenting the first line of a paragraph.
- Lining up columns of figures or names.
- Typing forms, tables, price lists and similar layouts.
How tab stops work
A machine with a tabulator typically has three parts:
- A tab rack or bar. A row of positions along the back of the machine.
- Tab stops. Small movable pieces set at the positions you choose.
- A tab key or bar. When pressed, it releases the carriage so it moves until it catches on the next stop.
Details vary by make and model. Some machines have a tab key at the keyboard. Others have a tab bar or a lever. And many basic or portable machines have no tab mechanism at all.
Setting a tab stop
The exact steps vary, so check your model’s manual if you have it. A general procedure is:
- Move the carriage to the position where you want the stop. Use the scale or printing point indicator to choose the spot.
- Press the tab set key or move the tab-setting lever for your machine.
- Move the carriage elsewhere and press the tab key to test that it stops where you expect.
Set stops in order from left to right, then test each one.
Clearing tab stops
Again, details depend on the model. Common approaches include:
- Clear one stop: move the carriage to the stop and press the tab clear key.
- Clear all stops: some machines have a key that clears everything. On others, you hold the clear key while moving the carriage across the full width.
If you are unsure, practice with a spare sheet of paper and check the machine after each step.
Using tabs for columns and indents
- Decide how wide each column should be before you start.
- Set a stop for the start of each column.
- Use the tab key to jump from column to column.
- For paragraph indents, set one stop a few spaces in from the left margin. See How to Set Margins on a Manual Typewriter.
Troubleshooting
- The carriage does not stop at the tab stop. The stop may not have been set properly, or the mechanism may need cleaning.
- The carriage runs right past the margin. Check that the margin stops are in the right place.
- The tab key feels jammed. Dust and dried grease are common causes. Avoid forcing it.
- The tab doesn’t hold. Some stops can be knocked out of place, especially after a heavy carriage return. See What the Carriage Return Lever Does and How to Use It.
Related reading
- Other keys on the keyboard: Typewriter Keys and Their Functions
- The whole machine: Parts of a Typewriter