Short definition of elite
Elite is a typewriter type size that prints 12 characters per inch. Pica is the larger and more common alternative, printing 10 characters per inch. The number of characters per inch is called the pitch. Elite type is smaller and fits more on a line, so it is sometimes called 12-pitch.
Pica vs elite at a glance
| Pica | Elite | |
|---|---|---|
| Characters per inch | 10 | 12 |
| Letter size | Larger | Smaller |
| Line capacity | Fewer characters | More characters |
| Readability | Often easier to read | More compact |
| Space on a typical page | A 6-inch line holds about 60 characters | A 6-inch line holds about 72 characters |
Both are usually single-spaced vertically at the same line spacing, so a pica page and an elite page do not differ in height. The difference is mostly horizontal.
Pitch comes from the escapement, not only from the type
Pitch is not just a font choice. On a manual typewriter, the escapement releases the carriage by a fixed distance each time you press a key. A pica machine is built to move the carriage a certain distance per character, and an elite machine moves it by a smaller amount. The type slugs are designed to match.
That means you generally cannot change a pica machine into an elite machine by swapping type, and the reverse. The characters would be spaced wrongly. When you buy a machine, you are choosing a pitch.
How to tell which one you have
- Type ten characters in a row, such as ten lowercase “x” characters, on a sheet of paper.
- Measure them with a ruler.
- If they span about an inch, it is pica. If they take up about five-sixths of an inch, it is elite.
Some machines are also marked with “Pica” or “Elite” on the nameplate or the paper table. Some less common sizes exist, so a result outside these two does not mean the machine is broken.
Which should you choose?
- Choose pica if you want larger, more readable text, or if you plan to use the machine for letters you want to be easy to read.
- Choose elite if you want to fit more text on a page, or like the compact look.
Neither is faulty. A common worry is that an elite machine “looks wrong” because its letters seem small and close together. That is normal for 12-pitch type.
Related questions
What are the two types of typewriters? The question has several answers depending on context. Commonly it refers to manual and electric machines. In this article, the two types of type are pica and elite.
Is there an open-source typewriter font? Digital fonts that imitate typewriter type exist, including free ones, and many are monospaced, which means every character takes the same width, as on a real machine. Licenses vary, so check the terms before you use one.
What is the standard size of a typewriter? There is no single standard. Full-size office machines are larger and heavier than portables; see types of typewriters from old to new. Compare the dimensions of a specific model if size matters. The type size is usually either pica or elite.
Keep reading
- How spacing and carriage movement fit together: Parts of a Typewriter
- Setting margins when your pitch changes the line length: How to Set Margins on a Manual Typewriter