The short answer: two major assemblies
Sources do not agree on a single official answer to “what are the two major parts of a typewriter?”, so it depends on who wrote the question. The most useful way to split a manual typewriter is into two working assemblies:
- The keyboard and type action. This is everything that happens when you press a key: the keys, the levers behind them, the typebars that swing up, and the metal characters on the end of each typebar.
- The carriage. This is the moving upper section that holds the paper. It carries the platen (the roller), the paper supports, the margin stops and the levers you use to return to a new line.
Both are mounted on the frame, and the ribbon system sits between them. Some textbooks name other pairs, such as the carriage and the body of the machine. If you are answering a school question, check which framing your course material uses.
How a keystroke becomes a printed character
Understanding the sequence makes the rest of the parts easier to place:
- You press a key. The key lever pulls a linkage.
- The linkage throws a typebar upward and toward the paper.
- The ribbon is lifted into position in front of the paper.
- The raised character on the typebar strikes the ribbon, pressing ink onto the paper against the platen.
- The typebar falls back to rest and the escapement lets the carriage move one space.
That last step is called the escapement. It is the mechanism that releases the carriage one character at a time, and it is also why a typewriter’s character spacing is fixed. See Pica vs Elite Type for how spacing differs between machines.
The keyboard and type action
Keys and key levers
The keys are the part you touch. On most manual typewriters they are round keytops, often with a metal rim, sitting on the ends of levers. Different names get used for the same things, which is covered in What are typewriter keys called?. For how the layout is organised, see Parts and Characteristics of a Typewriter Keyboard. For what each special key does, see Typewriter Keys and Their Functions.
Typebars and type slugs
Each typebar is a thin metal arm with a raised character, often called the type slug or type, at the end. Most typebar machines have a fan-shaped group of these arms resting in a curve at the front, usually called the basket. The type has a character for each case, for example a lowercase and a capital letter, with the shift mechanism choosing which one reaches the paper.
Segment and typebar rest
The typebars pivot in a curved guide, often called the segment, which keeps them aligned so that each one strikes the same spot. Dirt or bent typebars here are a common cause of misaligned characters. The related problem of typebars bouncing back or double-striking is covered in Key Rebound on a Typewriter.
Shift mechanism
The shift keys move either the carriage or the typebar basket up and down so that the other half of the type slug hits the paper. The shift lock holds this position, much like caps lock on a computer.
The carriage
Platen
The platen is the rubber roller around which the paper wraps and against which the type strikes. It matters for print quality and noise. Read What Is the Platen on a Typewriter, and Why Does It Matter? for how it ages and how to tell whether yours needs attention.
Platen knobs
The knobs at each end of the platen let you turn it by hand to move the paper up or down. Many have a release that lets the platen turn freely.
Paper bail and paper guide
The paper bail is a bar, often with small rollers, that holds the paper against the platen. The paper guide is the edge or scale that helps you line up the sheet. Most machines also have a paper release lever that loosens the paper so you can straighten it.
Carriage return lever and line spacing
On a manual machine, the carriage return lever, on the left side of the carriage, moves the carriage back to the start of the line and turns the platen to the next line at the same time. A line-space selector sets whether you advance one, one and a half or two lines. Details are in What the Carriage Return Lever Does and How to Use It.
Margin stops
Margin stops are small movable blocks on a scale that limit how far the carriage can travel left and right. A bell usually sounds a few spaces before the right margin. See How to Set Margins on a Manual Typewriter. The margin release key lets you type past a stop temporarily.
Tab stops
Many (not all) typewriters include a tabulator so you can jump to preset positions. Basic portables may not have one. See Typewriter Tab Stops Explained.
The ribbon system
The ribbon is a strip of inked fabric that moves slowly between two spools. A part called the ribbon vibrator, or ribbon lift, raises the ribbon to the printing point each time you hit a key. A reverse lever switches the direction of travel when one spool is full, and a selector lets you choose a color or turn the ribbon off for stencil work. The full explanation is in How a Typewriter Ribbon Works, and swapping out a worn one is covered in how to load and replace a typewriter ribbon.
Frame, case and other parts
The frame holds everything in alignment. The outer body or cover, feet, and carrying case or lid are mostly protective. Many collectors also pay attention to the space bar, backspace key and the printing point indicator, which shows where the next character will land.
Quick reference table
| Part | Assembly | What it does |
|---|---|---|
| Keys | Keyboard | Levers you press to print |
| Typebar | Keyboard | Swings the character to the paper |
| Type slug | Keyboard | Raised character at the end of the typebar |
| Platen | Carriage | Rubber roller that backs the paper |
| Paper bail | Carriage | Holds the paper against the platen |
| Carriage return lever | Carriage | Returns the carriage and advances one line |
| Margin stops | Carriage | Limit how far the carriage can travel |
| Ribbon and spools | Between | Supplies the ink |
| Ribbon vibrator | Between | Lifts the ribbon to the printing point |
Popular brands and whether manual typewriters are still made
Names collectors commonly encounter include Remington, Underwood, Royal, Smith-Corona, Olivetti, Olympia, Adler and Hermes. Quality and condition vary widely, even within one brand, so the model and its condition usually matter more than the name. If you are not sure what you have, start with how to identify and date a vintage typewriter.
New manual typewriters have been sold in recent years by a small number of makers, but availability and quality are inconsistent, so check current reviews before buying. Most people buy a used machine instead.
When was the typewriter invented?
Several inventors built writing machines before the 1860s, but the first commercially successful design came from Christopher Latham Sholes and his collaborators, with Remington beginning production in the 1870s. For the full timeline, read When were typewriters a thing?.
Where to go next
- Learn about the typing surface: Parts and Characteristics of a Typewriter Keyboard
- Find home-row positions: What Are the Guide Keys on a Typewriter?
- Understand what the machine was built for: What was the main function of a typewriter?