What the lever does
The carriage return lever does two things in one movement:
- It returns the carriage to the start of the line, ready for the next line of text.
- It turns the platen by one line, so the paper moves up and you are ready to type on a fresh line.
On a manual typewriter, this lever replaces the Enter or Return key on a computer (see how typewriter and computer keyboards differ). It usually sits at the left end of the carriage. As you type, the carriage moves a space at a time. When you reach the end of the line, you push the lever across to bring it back.
How to use it
- Finish your line. If your machine has a bell, it will usually ring a few characters before the right margin. See How to Set Margins on a Manual Typewriter.
- Put the flat of your hand or your fingers against the lever.
- Push it firmly and smoothly toward the opposite side of the machine until the carriage stops at the left margin.
- Release the lever. It should spring back to its resting position.
- Resume typing.
A smooth, controlled push is better than a hard slam. Letting the carriage hit the stop hard can add wear over time. Some typists let the lever do a short, quick stroke and stop.
Setting line spacing
Many machines have a line-space selector, often a small lever or dial near the carriage return lever. It sets how far the platen turns for each push. Common settings are single, one-and-a-half and double spacing, though not all machines have all of them.
If you want a half-line or custom spacing, many machines have a platen knob with a release so you can turn the platen by hand. The platen article covers this part.
Carriage return lever vs carriage release levers
They are different controls:
- The carriage return lever moves the carriage back and advances one line.
- The carriage release levers let the carriage move freely, without advancing the paper, so you can position it by hand.
Use the release levers when you want to adjust your position within a line, for example to correct an error.
Common problems
- The carriage does not move back. Check that the margin stop is set sensibly and that the carriage is not blocked. Dirt or old lubricant can also slow it down.
- The paper does not advance. The line-space selector may be set incorrectly, or the mechanism may be worn.
- The carriage moves too quickly or slams. The carriage movement is driven by a spring, so check that it is not damaged. This may need a repairer. When viewing a machine for sale, a smooth carriage is one of the things to check before buying a used typewriter.
- The lever feels stiff. Dust and dried lubricant are common causes. Gentle cleaning can help, but avoid forcing a stiff lever.
Related reading
- All the carriage parts: Parts of a Typewriter
- Tabs and stops that act on the carriage: Typewriter Tab Stops Explained