Quick answer
Feed a sheet of paper in around the roller (the platen), set your left and right margins, and strike each key briskly and firmly, then release it right away. When the bell rings, finish your word and push the carriage return lever to start a new line. The big difference from a computer keyboard is that nothing is automatic: you advance the page, return the carriage and manage margins yourself.
Before you start: know your controls
Machines differ, but most manual typewriters share these parts:
- Platen: the rubber roller the paper wraps around, turned by a knob at the end.
- Carriage return lever: usually on the left, it moves the carriage back and rolls the paper up a line.
- Margin stops: small sliders, typically along the back of the carriage, that decide where the line begins and when the bell rings.
- Paper bail: the bar with rollers that holds the paper against the platen.
- Paper release lever: loosens the paper so you can straighten or remove it.
- Shift and shift lock: raise the capital letters and upper symbols.
- Ribbon selector: on many machines, a lever with black, red and sometimes “stencil” settings.
If you’re still working out which machine you have, see how to identify and date a vintage typewriter.
Load the paper
- Lift the paper bail away from the platen.
- Slide a sheet down behind the platen, in front of the paper table or guide. Using a spare backing sheet behind it can protect the platen and improve the impression.
- Turn the platen knob so the paper winds up around the roller until the top edge sits just past the typing point.
- Check that the paper is straight. If it isn’t, press the paper release lever, straighten it and release the lever again.
- Lower the paper bail so it holds the paper against the roller.
Set the margins
Slide the left and right margin stops to where you’d like each line to begin and end. A small bell rings a few characters before the right margin, which warns you to finish the word. Once the carriage reaches the right margin, the keys will usually lock, so you can’t keep typing past it unless you use the margin release.
Type with a firm, even touch
Typewriter keys need momentum. Use a quick, crisp strike with your fingertips and let the key spring back right away. Pressing slowly produces faint letters, and holding keys down or hitting neighbouring keys at the same time causes typebars to collide and jam. Start slowly to find a rhythm, and focus on even pressure rather than speed.
Return the carriage and start a new line
When the bell rings, finish your word and push the carriage return lever fully across. This moves the carriage back to the left margin and also advances the paper one line. On some machines, you’ll need to set line spacing first, usually with a small lever near the platen.
Fix mistakes
You have a few options:
- Many typists backspace and use correction fluid or tape, and let any liquid dry completely before typing over it, otherwise it can get on the typebars.
- Some people simply cross out an error or start the page again.
- If you can, roll the paper up a few lines before you apply correction fluid, so nothing drips into the mechanism.
Keys that older typewriters may be missing
Many older machines have no “1” key or exclamation point. The usual workarounds are:
- Type a lowercase l for the number 1.
- For an exclamation mark, type an apostrophe, backspace, then type a period.
- Some machines lack a zero, in which case a capital O is used.
Clear a jam
If two keys hit at once, they can lock together. Gently pull the typebars apart toward you, and they usually fall back into place. If they don’t free easily, stop and don’t force them, because bent typebars are harder to fix.
If no keys will move at all, check whether the keyboard lock or shift lock is engaged, or whether the carriage has hit the right margin.
Remove the paper
Don’t pull the page straight out against the roller. Press the paper release lever, slide the paper out, and then reset the lever. When you’re finished, move the carriage to a central position so the machine sits neatly in its case.