Before you start
The Imperial Good Companion was sold in several numbered versions over many years, and the controls are not identical on every one. This guide covers the common operations found on most manual portable typewriters. If a lever or key mentioned here is missing on your machine, it is probably a feature that your model does not have.
Place the typewriter on a firm, level surface. If it came in a case, take it out of the case first. Many portables are held in the case by a clip or screw at the base, so check how yours is fastened and release it before lifting. Make sure the carriage is free to move.
If you are not sure which version you have, our guide to Good Companion serial numbers and models can help.
Loading paper
- Lift or tilt back the paper bail (the bar that holds the paper against the roller), if your machine has one.
- Place a sheet, ideally with a second sheet behind it to protect the roller, behind the roller (also called the platen).
- Turn the platen knob so the paper feeds around the roller and appears at the front.
- Straighten the paper. If it is crooked, move the paper release lever, adjust the paper, and move the lever back.
- Return the paper bail to hold the paper in place.
Setting margins and tabs
Margin stops are small sliding pieces, normally on a scale at the front or back of the carriage. Move the left stop to where you want your lines to start, and the right stop where you want them to end. A small bell will warn you as you approach the right margin. If your machine has a tabulator, tab stops are set in a similar way and a tab key moves the carriage to the next stop. Not all versions have these.
Typing and carriage return
Press each key with a quick, firm, even stroke and release it right away. Do not hold keys down, and avoid pressing two keys at the same time, which can make typebars collide. At the bell, finish your word and use the carriage return lever, usually on the left, to move the carriage back and advance the paper. If you want a full walkthrough of the technique, see how to type with a typewriter.
Ribbon basics
Most portable typewriters use a fabric ribbon wound on two spools, with a lever or switch to choose the ribbon colour or to stop the ribbon for stencil work. Ribbon sizes and spool types vary, so check your model before buying. If your ribbon is dry or has tears, replace it. Take a photo of how the ribbon threads through the guides before you remove the old one.
Packing it away
Return the carriage to a central position, lower any raised parts, and secure the machine in the case as it was originally held. Keep the case closed in a dry place.
Where to find an original manual
Original manuals sometimes appear on manual libraries, classic typewriter websites and marketplace listings, where they may be sold as reprints. Check that the manual matches your model before relying on it.
Troubleshooting
- Keys sticking: Gently separate any typebars that have collided and check for dirt.
- Faint print: The ribbon may be dry or the ribbon-colour selector may be in the wrong position.
- Carriage not moving: Check that a lock or margin stop is not blocking it.